DIY Hydroponics Garden Tower Build for < 150$ | Part 1
Working and spending more time at home has recently gotten me more interested in gardening and growing my own vegetables. It has also been a pretty expensive past-time given the amount of materials, soil, and water needed to upkeep and grow a garden. I looked into cheaper alternatives and started learning more about hydroponics, however, that in itself is also pretty expensive to start. I figured I could build my own hydroponics system on my own for much cheaper. This is part one of a short series where I start my very first attempt at a hydroponics garden build.
Chris Loh
DIY Hydroponics | Aeroponics Garden Tower Build | Part 2
This is a follow-up video of a previous DIY hydroponics tower build. This is my second attempt at a more efficient and more durable build based on lessons I learned from the first build. I also took it a step further and built a 4-Tower System. It’s still not perfect, but again I learned a lot and will make a 3rd attempt at a single tower build based on what I learned during this attempt. In this video, I also provide a brief (very brief) update on the plants from the first build.
Chris Loh
DIY Hydroponics Vegetable Growing Tower [Part 3] – Under $200
It’s been a little while since I filmed an update on my Hydroponic/Aeroponic Tower Builds which brings me to part 3 of the series. This build revisits the single tower build, incorporating design improvements both learned and through feedback from all of you who are watching these videos. Today I document and film the build process for an updated design of the single tower and some of the challenges I faced during the build process. There are some times during filming when my camera began to overheat due to the temperature outside which resulted in some blurry video so I apologise for that.
Chris Loh
Topics Covered in the Video
- Tower build: 8:03
- Base Build: 26:50
- Preparing Seeds: 1:00:06
- Letpot Growing Update: 1:06:24
- New Design and Build Update: 1:07:13
